| CODE | DESCRIPTION | PRICE | IMAGES | |
|---|---|---|---|---|
| A/C General description Air conditioning system (cooling and heating) based on the Chilled Water system or with direct evaporation in units. The customer chooses it according to preferences. Each of the above two systems are designed with independent devices for each cabin. Additionally, two devices for parallel or alternating operation with a manual air distributor are provided as backup. One for the VIP cabin and galley. The other one for Master Cabin and Guest Cabin. All units with evaporator are installed outside the cabins, to coo it for greater comfort. Additionally, in the case of large storage spaces above the guest and under the VIP cabin, it is possible to cool these spaces with additional backup air conditioners. Ventilation system with independent supply and exhaust fans for each cabin. Each fan is located in the front technical room. Fresh air is supplied directly to the cabin, the exhausts are removed by the bathroom ventilation. Each fan is equipped with an EC motor with smooth regulation in the bathroom. Each cabin is equipped with a CO2 sensor that triggers the fan to operate at maximum efficiency. Additionally, in case of large compartments above the guest and VIP cabin, there is a possibility of ventilating these spaces. The yacht's ventilation system is equipped with diagnostics with damage signaling. |
||||
| The general differences between the two types of A/C systems: Direct expansion provides greater redundancy as each I / O unit is a separate circuit. Air discharged from evaporators is cooler than from chilled water systems. The system is simple, it does not require hydraulic equipment. In the event of a failure of the refrigeration system, repair is difficult and requires the knowledge and skills of a specialist with demanding instruments. When fully loaded, multiple chillers are running with compressors that generate noise. The refrigerant with oxygen-displacing properties reaches the living spaces of the yacht and, in extreme cases, can be a threat. Reconstruction of systems and replacement of steamers, e.g. for larger models, are not possible and usually require replacement of the installation. Chilled water system: It allows you to regulate the water temperature, in a situation where we do not need to fully use the cooling power, the air temperature from the exchangers is more comfortable. This arrangement has no restrictions as to the length of the installation, so the arrangement of the exchangers can be made with greater comfort. Such system consumes less energy because the compressor used in the main unit is usually smoothly regulated. The refrigerant is contained in one device in the engine room and cold water circulates in the living quarters. The layout allows for alterations and changes to indoor units. All repairs and system leaks come down to the work of a plumber. Despite many advantages of the chilled water system, it should be remembered that, regardless of the automatics used, it is a water hydraulic system that requires pressure control, venting, and topping up with water. In the chilled water system, the indoor units have actuators and valves that may become blocked between periods of non-use. |
||||
| below, A/C direct expansion system | ||||
| AC.1 | Master Cabin, VIP Cabin, Guest Cabin, Splt - Cruiser DEU16 EMERALD smartstart 16.000 BTU / 4,7kW Splt - Cruiser TVE16 EMERALD EVAPOR. 16.000 BTU Control panel - DOMETIC Air vent set ducts,grills Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S |  |
|
| AC.2 | Galley Splt - Cruiser DEU16 EMERALD smartstart 16.000 BTU / 4,7kW Splt - Cruiser TVE16 EMERALD EVAPOR. 16.000 BTU Control panel - DOMETIC Air vent set ducts,grills For galley ventilation - Extractor-fan SIEMENS LI97RA530 drawn 90cm/35,4in wide, 740m3/h/435cfm with air exhaust on the port side. Compensation air for the extractor-fan is by suction air from the cabins Extractor fan MV EC 200 - Helios Intake fan MV EC 200 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.3 | Starboard-upper locker Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.4 | Salon Splt - Cruiser DEU16 EMERALD smartstart 16.000 BTU / 4,7kW Splt - Cruiser TVE16 EMERALD EVAPOR. 16.000 BTU Control panel - DOMETIC Air vent set ducts,grills |
S | |
|
| AC.5 | SkyLodge & Helm Station Splt - Cruiser DEU16 EMERALD smartstart 16.000 BTU / 4,7kW Splt - Cruiser TVE16 EMERALD EVAPOR. 16.000 BTU Control panel - DOMETIC Air vent set ducts,grills Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.6 | Crew cabin Splt - Cruiser DEU16 EMERALD smartstart 16.000 BTU / 4,7kW Splt - Cruiser TVE16 EMERALD EVAPOR. 16.000 BTU Control panel - DOMETIC Air vent set ducts,grills Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.7 | Aft deck cooling & heating Splt - Cruiser DEU48 EMERALD smartstart 48.000 BTU / 14kW Splt - Cruiser EBDE48V EVAPOR. 48.000 BTU |
15585 | |
|
| below, A/C Water Chilled system | ||||
| AC.9 | Master Cabin, VIP Cabin, Guest Cabin, Webasto A18 Compact - Heating/cooling cabin unit 5.28kW Control panel - BlueCool MyTouch Air vent set ducts,grills Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S |  |
|
| AC.10 | Galley Webasto A18 Compact - Heating/cooling cabin unit 5.28kW Control panel - BlueCool MyTouch Air vent set ducts,grills For galley ventilation - Extractor-fan SIEMENS LI97RA530 drawn 90cm/35,4in wide, 740m3/h/435cfm with air exhaust on the port side. Compensation air for the extractor-fan is by suction air from the cabins Extractor fan MV EC 200 - Helios Intake fan MV EC 200 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.11 | Starboard-upper locker Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.12 | Salon Webasto A18 Compact - Heating/cooling cabin unit 5.28kW Control panel - BlueCool MyTouch Air vent set ducts,grills |
S | |
|
| AC.13 | Sky Lodge & Helm Station Webasto A18 Compact - Heating/cooling cabin unit 5.28kW Control panel - BlueCool MyTouch Air vent set ducts,grills Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.14 | Crew cabin Webasto A18 Compact - Heating/cooling cabin unit 5.28kW Control panel - BlueCool MyTouch Air vent set ducts,grills Extractor fan MV EC 125 - Helios Intake fan MV EC 125 - Helios Air quality contrller - Helios ACL Air flow switch - Helios SWE + SVE 160 Ventilation Speed-potenciometr |
S | |
|
| AC.15 | Water Chiller BlueCool V-Series V77T (8500-77000Btu, 2.5-22.6kW) | S |  |
|
| AC.16 | Chilled water connection system, automatic water refilling, chilled water venting. Webasto and Siemens components | S | ||
| AC.17 | Secondary Water Chiller BlueCool V-Series V77T (8500-77000Btu, 2.5-22.6kW) | 26688 | |
|
| AC.18 | Aft deck cooling & heating Two Units BlueCool A-series A36 Compact 36.000 Btu, 10.7kW |
10877 | |
|
| Engine room Ventilation Ventilation of the engine room is provided by a set of two supply fans and a set of two exhaust fans. Each of the fans has a separate control system. The principle of basic work - during the activity on the vessel and the activation of the main safety devices, only one exhaust fan No. 1 works with a capacity of 1000m3 / h 588cfm, which provides 20 changes per hour for the engine room. When the main engine is started, the exhaust fan no. 2 is started with a capacity of 1000m3 / h 588cfm. Additionally, the fans No. 3 No. 4 work with the capacity of 1000 m3 / h 588cfm each. Increasing the efficiency of ventilation takes place after increasing the temperature in the engine room in relation to the temperature outside the yacht, and this happens in 4 steps every 5K. Regardless of the automation used, the capitan in the wheelhouse or directly in the engine room can read the temperature and trigger the maximum operation of the fans (also from the steering position). Coarse mesh filters were installed on the air intake to the engine room to pre-clean the intake air. Filters can be installed during stay in marinas and places around the world exposed to dust, and have been equipped with a cleanliness indicator. Each fan has dampers with an actuator responding to power failure. The damper and actuator have been coupled with the SEARIRE (See Fire protection System) system. |
||||
| AC.19 | Intake fan Helios HQW 630/4 16210m3/h 9540cfm 1325RPM (1.5kW/230V/8,4A) Fan inverter controler & protection drive - Danfoss Micro Drive FC 51 132F0005 Intake fan Helios HQW 630/4 16210m3/h 9540cfm 1325RPM (1.5kW/230V/8,4A) Fan inverter controler & protection drive - Danfoss Micro Drive FC 51 132F0005 Extractor fan Helios HQW 630/4 16210m3/h 9540cfm 1325RPM (1.5kW/230V/8,4A) Fan inverter controler & protection drive - Danfoss Micro Drive FC 51 132F0005 Extractor fan Helios HQW 630/4 16210m3/h 9540cfm 1325RPM (1.5kW/230V/8,4A) Fan inverter controler & protection drive - Danfoss Micro Drive FC 51 132F0005 "Fan Transformer controller with motor protection unit - Helios MWS 10" One-step thermostat Helios TME 1 - single-step One-step thermostat Helios TME 4 - four-step Belimo LF230 Damping for main fan |
S | ||
| AC.20 | Differential pressure switch DDS for flow filter control | S | ||
| AC.21 | Engine room A/C Webasto BlueCool S-series S27 - 27000BTU/7,9kW Webasto Self-contained unit accessory - duct,grills set Control panel - Webasto, MYTOUCH DISPLAY Cooling Pump WB350, filter, hose, valves, |
9600 | ||
| Sanitary Instalations System | ||||
| AC.23 | Two (2) Water Boiler - 400l Galmet, 2-functions with electric coil 3kW 230V and coil for heat exchanger from power genset and main engines | S | ||
| AC.24 | Independent water heater Eberspacher Hydronic M12 Marine. For heating and hot water. Diesel fueled. | 6750 |  |
|
| AC.25 | Central Vacum Cleaner AEG ZC870LCD with pipeline and sockets | S |  |
|
| AC.26 | Pipeline for cold&hot water, gray, black water, VIEGA pipelines system | S | ||
| AC.27 | Potable Water tank V=350l located below galley, HDPE material, Tek-Tanks, UK | S | ||
| AC.28 | Water tank V=1000l HDPE material, Tek-Tanks, UK | S | ||
| AC.29 | Gray water tank 300l HDPE material, Tek-Tanks, UK | S | ||
| AC.30 | Black water tank 500l HDPE material, Tek-Tanks, UK | S | ||
| AC.31 | Circulation pumps, Jabsco brand | S | ||
| AC.32 | AquaTec Watermaker KC190 compact 190l/h | S |  |
|
| AC.33 | Aqua Matic 1400-2 Watermaker 220L/h 220V PREFILTER COMMERCIAL 32.5SQFT OIL WTR SEPARATOR 32.5SQFT SRC Charcoal filter assembly Intall kit Fresh water flush 2 membranes installed in the unit Optional accessories: UV STERILIZER 12VDC 2GPM SOFT START 115/50/60HZ SURE ST REMOTE KIT,200'CBL,PRKR 4"HMI MEDIA FILTER ASSY |
33828 |  |
|
| AC.34 | Fire Protection System - Sea Fire Brand Zone1 - Engine Room - Volume 45,32m2 NFD 1625 M1625 ft3 (46,0 m3) S27-512-2333 BI-DIR SMAC 3030 ft (9,15 m) S27-136-0030 Machinery Shutdown Restart Unit, 8circuit, DeEnerg S27-131-750 SYSTEM MONITOR & E.S. CONTROL WITH HIGH TEMP SENSO S27-131-463 Zone2 Locker&Electrical Switchboard - Volume 7,2m2 NFD 275 A275 ft3 (7,8 m3) S27-512-485 Zone3 Locker&Electro Mechanical Devices - 8,4m2 NFD 300 A300 ft3 |
S | ||
| AC.35 | Two Aromatizers, sprays the fragrance into the ventilation system, keep the pleasant and selected fragrance inside the yacht |
S |  |
|
| AC.36 | Ionizer - It is a technologically advanced system for purifying and ionizing the supplied air in mechanical ventilation systems. It effectively reduces the amount of bacteria, viruses, fungies, molds and dust in the indoor air. The device is included in the ventilation system. | S |  |